Installing a Shower Unit Properly: What You Need to Know

Installing a Shower Unit Properly: What You Need to Know

Blog Article

Contact Us

How do you feel when it comes to How to Install a One-Piece Shower Unit?

An effective shower installment requires cautious preparation as well as a great deal of work. Most of the times, you will need to do 3 types of tasks: mounting wall surfaces, installing the plumbing, and ending up walls.

Preparation

First of all, you have to choose the kind of shower that you desire to install. It is very important to identify whether the chosen shower can managing specific systems as well as can manage a safe level of water via the central heating boiler. Many shower systems nowadays are made to be adaptable to different water pressures (such as kept warm water and also cold mains).
It is likewise crucial to take into account the water pressure as well as the preparation of the piping and also water drainage for the shower

Various Types of Shower Units

Push-on Mixer: The hose as well as spray parts of the push-on mixer shower system can be linked to the bathroom faucet as per your demand, and also the water temperature can be readjusted via the faucets. Push-on mixers are cheap and also extremely easy to set up. Nevertheless, although the hose pipe connection is basic, it is quickly removed. In addition, it is bothersome to change the temperature level.

Bath/Shower Mixer: The hose and spray of this type of shower are integrated with a bathroom mixer tap, as well as the temperature level can be readjusted via the bathroom faucets. It is an extremely cheap alternative and also no additional plumbing is included. However, the bath/shower mixers also experience troublesome temperature control options.

Manual Mixer: The hose pipe as well as spray of a manual mixer shower unit are a part of the wall unit and also the cold and hot water materials are linked to a single shutoff The temperature level as well as pressure of the water are controlled through either one or a range of knobs (in a lot more expensive showers). Although temperature level control is much easier in manual mixer kinds, they are a lot more expensive than the formerly pointed out mixers. They also call for added plumbing of hot and cold water pipelines.

Thermostatic Mixer: The hose pipe and also spray of this shower type belong of the wall surface unit and also the hot and cold water supplies are attached to a single valve below too. It is full with an integrated stabiliser to self-adjust the water temperature and also to avoid it from becoming also hot. Among the most significant advantages of a thermostatic mixer shower kind consists of practical temperature level control. Nevertheless, it is the most costly of the different mixer choices.

Power Shower: A power shower is a solitary system containing a powerful electrical pump that is capable of changing both the water stress as well as temperature level. This type of shower can be fitted if there is water from a cold water cistern and also a hot water cyndrical tube. A power shower makes the change of both pressure and also temperature simple. On the other hand, it disagrees for water warmed directly by the shower or where the water is provided by a mix boiler under keys pressure.

Electric Shower: An electrical shower is plumbed into a keys cold water supply and also it heats up the water electrically. It is very important to keep in mind that for this shower kind to be set up, the mains stress requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The unit permits the temperature as well as pressure to be changed using a handle. Versions with temperature stabilisers are better as they continue to be untouched by other taps somewhere else in operation within the household. A major disadvantage of electrical showers is that the control handle only enables the choice of heats at less pressure, or reduced temperature levels at a higher stress. This is bothersome in the winter season when the spray is usually weak and the keys water is colder. However, this issue is dealt with in some designs which are readily available with a winter/summer setup.

Method

Depending upon the type of shower you wish to mount, the shower head have to either be fitted in order to prevent its contact with the water in the bath below or the base tray, or it must have a check valve.
Before starting, it is recommended to mark the settings of the shower head as well as control, as well as to prepare the pipe-work included. Furthermore, the drain system to eliminate the waste water will require to be intended. Both placements of the wire course and also the shower button will certainly likewise need to be thought about if an immediate or electric shower system is being installed.
Use the instruction overview given with the shower unit to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is necessary to cut off the supply of water. In order to shield the pipes, they ought to be given a waterproof covering as well as additionally fitted with isolating shutoffs. The pipelines can then be buried right into the wall surface and plastered over to neaten the total look.
Fit the base tray, shower head, and installations.
Link the main shower control to the pipelines that will certainly be supplying the water (This might need a female screw string adapter).
Reconnect the water supply and also examination the pipes for any leakages, as some may require tightening up.
If you are installing an electric shower, remember to switch off the power supply before making any electric connections. When these connections have actually been made (there ought to be guidance within the instruction manual), the power supply can be switched over back on.

Adjusting Water Stress to Suit Your Shower

The cold water storage tank can be lifted to a greater elevation (occasionally as low as 150mm (6inches)) by installation a strong wooden assistance beneath it - potentially composed of struts as well as blockboards. If you choose this option, the major and circulation pipes will certainly also have to be elevated to meet the brand-new height of the tank.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is selected, it has to be connected right into the power supply in order to operate.

Piping as well as Water drainage

It is best to utilize 15mm diameter supply pipelines, and make the runs to the shower as short and also straight as possible so as to keep maximum pressure and reduce warm loss. In addition, by minimising using elbows for pipe edges, you can lower the resistance in the circulation of the water system. You can attain this by bending the pipes instead.

The Majority Of Common Errors

Going against or overlooking local code limitations.

Utilizing pipes that are also tiny.

Attaching copper to galvanized without using a brass or dielectric fitting in between both.

Not making use of tape or pipeline compound at threaded joints.

Not leveling your fixtures when installing them.

Not setting up an air space loading for components.

Reducing supply stub outs too short to mount the shutoff valves onto after the finished wall is in place.

Not correctly lining up tubes into installations or quit shutoffs. (Forcing the nut onto the compression ring at an angle when the tubing is at an angle will cause a leakage.).

When transforming the water back on in your house, constantly run the outdoors tube shutoff or purge your commodes to hemorrhage dust and also air from the lines. This particles can trigger issues in your sink faucets as well as other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As a keen reader on How to Install a Direct-to-Stud Shower Enclosure, I figured sharing that excerpt was a great idea. Appreciated our review? Please share it. Let somebody else find it. I am grateful for your time. Please come visit our website back soon.

Emergency? Call us!

Report this page